Pi ZeroW Handheld in a GBA shell
This was one of my earlier projects. All DIY design so it's a little messy but such a fun process to make it up on my own.
Breadboard protoypes for the win
The buttons I had were too thick so I decided to make my own contact points with solder I sanded down on a small piece of protoype board.
Test fit. So far so good, but the screen was upside down.
For sound, I harvested a chip from a USB headphone and mic adapter I had laying around and small speaker.
For power, I used a powerboost 1000c and a 2500 mah battery.
And I sort of got it all to fit inside the gba shell.
